Pool and spa combinations
A pool and spa combination gives you a swimming pool and a heated spa in one design. The spa is often raised, with water spilling over into the pool, or set at the same level as a zone within the pool.
Popular layouts
- Raised spillover spa. The spa sits above the pool and its water flows over a spillway into the pool, a strong visual feature that also adds the sound of moving water.
- Flush spa. The spa sits level with the pool, separated by a wall, for a cleaner, modern look.
- Spa zone with jets. A bench or corner of the pool is fitted with jets for a simpler, lower-cost option.
Heating, jets and controls
Because the spa holds much less water than the pool, it heats quickly and can be run hotter. Most combinations use valves so the spa can be heated on its own, then switched back to share filtration with the pool. Jets, a blower for bubbles, lighting and automation let you control everything from a panel or your phone. See our pool heating guide for heating choices.
Things to plan for
A spa adds plumbing, a dedicated pump and heating, so plan for those in the budget and in the equipment area. If the spa is a separate structure, it can also need its own safety barrier. We design the layout, equipment and controls together so it runs simply day to day.
How the build works
- Free design consultation at your home
- Design and itemised quote
- Soil test and engineering, usually two to three weeks after you sign
- Approval through a private building certifier, usually two to four weeks
- Construction, where we aim for 10 to 12 weeks from excavation to commissioning when we manage the whole project
- Handover, start-up and a walk-through of how to look after your pool
Prefer a standalone spa? See concrete spas.
Common questions
Can I heat the spa without heating the pool?
Yes. Most combinations use valves so the spa can be heated on its own, then switched back to share filtration with the pool.
Does a spa need its own fence?
If the spa sits inside the pool’s safety barrier, it is covered by that barrier. A separate spa that holds 300mm or more of water needs its own compliant barrier or an approved lockable cover arrangement. Your certifier confirms what applies.
Can I add a spa to my existing pool?
Often, yes, as part of a renovation. See our renovations page.
Book a free design consultation
Tell us about your block and what you have in mind, and we’ll book a time to walk your site. Consultations are free and run on weekdays.
Book a Free Design Consultation
We build across Brisbane, Logan, the Gold Coast, Redlands, Ipswich and Moreton Bay. See where we build.